Product Introduction
Product Features:
Good weather resistance and anti-aging property: Service life is up to more than 50 years.
Low thermal conductivity: Thermal conductivity is only 0.018W/(m·K), with excellent heat insulation performance; indoor temperature can drop by 8-13°C in hot summer.
Excellent thermal insulation effect: With this product, 70% of indoor heat can be retained without loss.
Non-combustible: Fire rating reaches Grade A1, the highest level.
Cavity-free system: Strong wind pressure resistance, suitable for multi-storey and high-rise buildings.
High safety factor: Can effectively reduce the load-bearing of floors and make buildings safer.
Short construction period and low cost: Combines thermal insulation and architectural coating construction into one; the overall construction period can be shortened by about 10% and does not occupy the dominant construction period.
Strong adhesion: The thermal insulation coating bonds firmly with the wall, without peeling, hollowing or other phenomena.
Insulation property: Adopts nano-vacuum ceramic super heat-resistant technology to form insulation between coating layers.
MIC-CERAMIC THERMAL INSULATION COATING
It has the characteristics of ultra-light specific gravity, fire and flame retardancy, extremely low thermal conductivity due to nano-micro pores, good workability, excellent thermal insulation performance, low cost, good cohesion after mixing with water, and easy construction. For houses with wall treatment, the indoor temperature in summer is 8-12°C lower than that of untreated houses, air-conditioning energy consumption is saved by about 30%, and the annual air-conditioning operation time can be shortened by about 20 days compared with before treatment. It is an ideal composite thermal insulation material for energy-saving buildings in hot-summer and cold-winter areas, and a new generation of green and environmentally friendly thermal insulation material.
Application Scope:
This product can be applied to the surfaces of rammed earth, cement mortar, concrete, mineral wool building materials, etc. It is widely used for exterior wall decoration of office buildings, hotels and high-end residential buildings. Especially suitable for hot-summer and cold-winter areas, it saves air-conditioning costs and meets the requirements of the country for building a resource-saving society.
Construction Process:
Surface Treatment:
1. The surface to be coated must be flat, firm, clean and dry. New walls should be maintained for more than 28 days, and the pH value of the wall should be less than 10. Construction can only be carried out when the moisture content is less than 10%.
2. If the old paint on the surface to be coated is loose, chalking or peeling, it must be completely removed, and repaired and leveled with special putty.
3. Carry out grid division treatment as required to facilitate construction and reduce joints.
Construction Method: Stir evenly before use, and apply by roller coating or airless spraying.
Tool Cleaning: Clean with fresh water.
Precautions:
1. This product should be stored in a cool, dry warehouse without direct sunlight, and must not be stored below 0°C.
2. Construction is not suitable when the relative humidity is above 85%.
3. No other paints or organic solvents shall be added to this product during use.
4. Construction is not suitable if the wall surface is loose and seriously chalking.
Good weather resistance and anti-aging property: Service life is up to more than 50 years.
Low thermal conductivity: Thermal conductivity is only 0.018W/(m·K), with excellent heat insulation performance; indoor temperature can drop by 8-13°C in hot summer.
Excellent thermal insulation effect: With this product, 70% of indoor heat can be retained without loss.
Non-combustible: Fire rating reaches Grade A1, the highest level.
Cavity-free system: Strong wind pressure resistance, suitable for multi-storey and high-rise buildings.
High safety factor: Can effectively reduce the load-bearing of floors and make buildings safer.
Short construction period and low cost: Combines thermal insulation and architectural coating construction into one; the overall construction period can be shortened by about 10% and does not occupy the dominant construction period.
Strong adhesion: The thermal insulation coating bonds firmly with the wall, without peeling, hollowing or other phenomena.
Insulation property: Adopts nano-vacuum ceramic super heat-resistant technology to form insulation between coating layers.
MIC-CERAMIC THERMAL INSULATION COATING
It has the characteristics of ultra-light specific gravity, fire and flame retardancy, extremely low thermal conductivity due to nano-micro pores, good workability, excellent thermal insulation performance, low cost, good cohesion after mixing with water, and easy construction. For houses with wall treatment, the indoor temperature in summer is 8-12°C lower than that of untreated houses, air-conditioning energy consumption is saved by about 30%, and the annual air-conditioning operation time can be shortened by about 20 days compared with before treatment. It is an ideal composite thermal insulation material for energy-saving buildings in hot-summer and cold-winter areas, and a new generation of green and environmentally friendly thermal insulation material.
Application Scope:
This product can be applied to the surfaces of rammed earth, cement mortar, concrete, mineral wool building materials, etc. It is widely used for exterior wall decoration of office buildings, hotels and high-end residential buildings. Especially suitable for hot-summer and cold-winter areas, it saves air-conditioning costs and meets the requirements of the country for building a resource-saving society.
Construction Process:
Surface Treatment:
1. The surface to be coated must be flat, firm, clean and dry. New walls should be maintained for more than 28 days, and the pH value of the wall should be less than 10. Construction can only be carried out when the moisture content is less than 10%.
2. If the old paint on the surface to be coated is loose, chalking or peeling, it must be completely removed, and repaired and leveled with special putty.
3. Carry out grid division treatment as required to facilitate construction and reduce joints.
Construction Method: Stir evenly before use, and apply by roller coating or airless spraying.
Tool Cleaning: Clean with fresh water.
Precautions:
1. This product should be stored in a cool, dry warehouse without direct sunlight, and must not be stored below 0°C.
2. Construction is not suitable when the relative humidity is above 85%.
3. No other paints or organic solvents shall be added to this product during use.
4. Construction is not suitable if the wall surface is loose and seriously chalking.
Product details
